Safety Instructions

• The P1125 is NOT a battery charger

  • Never connect the probe terminals to a battery.

  • Never connect to a target device if a battery is installed.

  • Remove any battery from the target device before using P1125.

• Never push objects of any kind through the P1125 slots. Never spill liquid of any kind into the P1125.

• Never block or obstruct P1125 ventilation.

  • Do not use or store P1125 in a hot location, such as near a heater, in direct sunlight, or in a closed space.

• Do not attempt to service this product yourself.

• Discharge static electricity from your body before handling the product.

  • In addition, avoid packaging or covering the product with materials which generate static electricity. Contact with static electricity may result in product failure and/or damage.

• Use on the the supplied power supply to power the P1125.

• Do not leave the P1125 unattended.

Best Practices

• Shutdown the P1125 via the OFF button, or thru the user interface BEFORE removing power.

  • When shutdown is started, the LED will blink RED for ~10s and then turn off.

  • When the LED is off, you may disconnect power.